P6 Default Settings¶
This page list all the default configuration embedded inside P6.
You can override the default settings by creating an additional conf/application.conf file in your instance’s data root folder (defined in the .env file).
Read more about the underlying config library.
Jetty Settings¶
The jetty section sets the configuration of Jetty.
| Property | Default value | Description |
|---|---|---|
| jetty.threads.max | 256 | The maximum number of threads. The default value is 256. |
| jetty.threads.idle.timeout | 120000 (2 minutes) | The idle timeout for Jetty threads in milliseconds. |
| jetty.http.port | 8080 | The HTTP port for Jetty. |
| jetty.http.admin.port | 8091 | The port for Jetty’s admin interface. |
| jetty.http.idle.timeout | 60000 (1 minute) | The idle timeout for HTTP connections in milliseconds. |
| jetty.https.admin.port | 8443 | The HTTPS port for Jetty. |
| jetty.config.size.output.buffer | 65536 (64 KB) | The size of the output buffer in bytes. |
| jetty.config.size.request.header | 32768 (32 KB) | The size of the request header buffer in bytes. |
| jetty.config.size.response.header | 32768 (32 KB) | The size of the response header buffer in bytes. |
| jetty.dos.maxRequestsPerSec | 128 | The maximum number of requests per second. |
| jetty.dos.delayMs | -1 | The delay time for denied requests in milliseconds. Set -1 for no delay |
| jetty.dos.maxWaitMs | 50 | The maximum wait time for denied requests in milliseconds |
| jetty.dos.throttledRequests | 5 | The number of requests to allow in a throttle period |
| jetty.dos.throttleMs | 30000 (30 seconds) | The throttle period in milliseconds. |
| jetty.dos.maxRequestMs | 60000 (1 minute) | The maximum time a request can take in milliseconds. |
| jetty.dos.maxIdleTrackerMs | 30000 (30 seconds) | The maximum idle time for a tracker in milliseconds. |
Common Message Bus Config¶
The cmb section sets the configuration for the Common Message Bus.
| Property | Default value | Description |
|---|---|---|
| cmb.queue.item.notifier.class | io.platform6.core.impl.cmb.listener.CMBListener | The class for the item notifier. This is for debugging purposes only. |
P6 Auth specific settings¶
The p6auth section sets the configuration for P6Auth.
| Property | Default value | Description |
|---|---|---|
| p6auth.remote.provider.url | https://login.amalto.io/apis/v2/p6auth | The URL for the remote authentication provider. |
| p6auth.client.token.endpoint | /oauth2/token | The endpoint for retrieving tokens. |
| p6auth.client.id | p6core | The identifier for the client. |
| p6auth.client.secret | The secret for the client. | |
| p6auth.client.redirect.uri | http://www.platform6.io | The redirect URI for the client. |
| p6auth.org.children.limit | -1 | Set the number of children to be loaded in the tree |
Antivirus settings¶
The antivirus section sets the configuration for the antivirus.
| Property | Default value | Description |
|---|---|---|
| antivirus.engine | none | Set the antivirus engin (none, clamav) |
| antivirus.action | delete | Set the antivirus action on corrupted file (none, delete, quarantine) |
| antivirus.clamav.hostname | host.docker.internal | Set the hostname of the antivirus |
| antivirus.clamav.port | 3310 | Set the port number of the antivirus |
| antivirus.clamav.timeout | 500 | Set the timeout value when analyzing a file |
Hazelcast - default standalone only¶
The hazelcast section sets the configuration for Hazelcast, an open-source data grid solution.
| Property | Default value | Description |
|---|---|---|
| hazelcast.hazelcast.instance-name | p6core_standalone_node_x | The name of the Hazelcast instance. |
| hazelcast.hazelcast.network.port | 5900 | The port for the Hazelcast network. |
| hazelcast.hazelcast.network.public-address | 127.0.0.1 | The public address for the Hazelcast network. |
| hazelcast.hazelcast.network.join.multicast.enabled | false | The flag that determines whether multicast is enabled. |
| hazelcast.hazelcast.network.join.tcp-ip.enabled | false | The flag that determines whether TCP/IP is enabled. |
InMemoryDataGrid Configuration¶
The imdg section sets the configuration for the InMemoryDataGrid (IMDG).
| Property | Default value | Description |
|---|---|---|
| imdg.distributed.pmap.store.impl | PROXY | The implementation of the PMap store. |
| imdg.distributed.pmap.store.provider.class | io.platform6.core.impl.platform.imdg.P6MapPersistenceProvider | The provider class for the PMap store. |
| imdg.distributed.pqueue.store.impl | PROXY | The implementation of the PQueue store. |
| imdg.distributed.pqueue.store.provider.class | io.platform6.core.impl.platform.imdg.P6QueuePersistenceProvider | The provider class for the PQueue store. |
| imdg.cp.members | 0 | The number of nodes in a consensus group |
| imdg.cp.discover.wait | 600 | The number of seconds to discover a consensus group |
Database Configuration¶
The database section sets the configuration for the Database (PostgreSQL).
| Property | Default value | Description |
|---|---|---|
| database.host | database | The database server hostname. |
| database.port | 5432 | The database server port number. |
| database.name | b2box | The name fo the database. |
| database.schema | p6core | The name fo the schema inside the database. |
| database.username | b2box | The user authorized to access the schema. |
| database.password | The user password. |
p6 Configuration Documentation¶
The p6 section sets the configuration for P6Core.
| Property | Default value | Description |
|---|---|---|
| p6.cache.annotation | false | Enable or disable cache annotations |
| p6.log4j.appender.notify.threads | 2 | Set the number of threads for the log4j appender to notify |
| p6.org.trustedPublishers.path | /*/Trusted Publishers | Set the path for the Trusted Publishers |
| p6.store.context | PGSQL-StoreContext.xml | Set the context source filename for the database |
| p6.store.retry.delay | 700 | configure the store retry handler, which is called when failing on concurrent transaction commits |
| p6.store.retry.count | 8 | Set the number of retries |
| p6.store.timeout.connection | 30000 (30 seconds) | Set the maximum number of milliseconds that a client will wait for a connection from the pool. The lowest acceptable connection timeout is 250ms |
| p6.store.timeout.idle | 600000 (10 minutes) | Set the maximum amount of time that a connection is allowed to sit idle in the pool. The minimum allowed value is 10000ms (10 seconds) |
| p6.store.pool.size | 10 | Set the maximum size that the pool is allowed to reach, including both idle and in-use connections |
| p6.store.lifetime.max | 1800000 (30 minutes) | Set the maximum lifetime of a connection in the pool. A value of 0 indicates no maximum lifetime (infinite lifetime), subject of course to the idleTimeout setting |
| p6.camel.context.message.history.enabled | false | Enable or disable message history |
| p6.camel.context.tracing.enabled | false | Enable or disable tracing |
| p6.camel.context.breadcrumbs.enabled | false | Enable or disable breadcrumbs |
| p6.camel.p6ftpd.keyStore.password | Set the keystore password | |
| p6.camel.p6log.LogConsumer.QueueSize | 64 | Set the queue size |
| p6.camel.p6log.LogConsumer.limiter.capacity | 1 | Set the rate limit capacity |
| p6.camel.p6log.LogConsumer.limiter.duration | 5 | Set the rate limit duration |
| p6.camel.async.callback.timeout | 10 (minutes) | Determines the number of minutes to wait for an asynchronous callback. |
| p6.job.control.execution.messages.length | 1024 | Set the number of messages that could be queued |
| p6.job.control.broadcast.get.response.timeout | 10 (minutes) | Set the number of minutes to wait for cluster wide GET broadcast request |
| p6.job.control.broadcast.cancel.response.timeout | 30 (secondes) | Set the number of seconds to wait for cluster wide CANCEL broadcast request |
| p6.job.control.workspace.entities.ttl.finished | 120000 | Set the Time to live for (ms) workspace entities when job is stable and finished |
| p6.job.control.workspace.entities.ttl.stale | 120000 | Set the Time to live for (ms) for workspace entities for old jobs |
| p6.xss.json.ignoredKeys | [“mainScript”, “classScripts”, “resources”, “content”, “byteContent”, “xmlStep”, “xmlView”, “scriptSegments”, “query”, “userQueryValue”, “serviceItemsZip”, “entity”, “signature”, “logo”, “schema”, “data”, “secretKey”, “publicKey”, “json”, “xml”, “template”, “javascript”, “text”] | Set the list of JSON attribute keys to ensures these attributes will be ignored by the inbound endpoint JSON sanitizer |
| p6.filter.xss.ignoredHeaders | [“message-id”, “subject”] | Set the request headers that are NOT checked for XSS vulnerability |
| p6.dsl.securesocket.identityKeyPassword | Set the identity password for the secure socket | |
| p6.platform.appProfile.refresh.timer.period | 60 | Set the Tile to live for the application profile |
| p6.service.default.runner.pool.size | 2 | Set the thread pool size for inbound message delivery |
| p6.service.default.exclude | false | Enable or disable the service start |
| p6.allowed.paths | [] | Set the extra paths allowed for transaction documents ($P6DATA and $TMP are default values) |
| p6.service.application.job.wait.duration | 700 | Set the duration in milliseconds of a wait step inside a job process |
| p6.service.application.job.wait.extensions | [“war”] | Set the extensions of resources casing a wait |
| p6.service.auditing.provider | LOG4J | Set the name of the audit provider (LOG4J or ELASTICSEARCH) |
| p6.service.auditing.resource.requests | false | Enable or disable the JSX-RS resource request auditer |
| p6.service.counters.metrics.cache.ttl | 60000 | Set the Time to live for (ms) metrics cache |
| p6.service.counters.date.format | yyyyMMdd’T’HH ss.S z |
Set the date format |
| p6.service.counters.date.timezone | Set the date timezone (if empty, the default one of the system will be used) | |
| p6.service.tables.batch.size | 25000 | Set the size of the pagination when doing table data export. |
| p6.service.scripts.as2.from.domain | platform6.io | Set the domain used in AS2 envelope MIME headers |
| p6.service.scripts.runner.pool.size | 32 | Essential to extend the default(2) size of the cmb queue runner pool for this service |
| p6.service.views.max.viewable | 0 | Set the max size uploaded to a browser. (Zero is allow any) |
| p6.service.views.default.date.format | yyyy-MM-dd | Set the date format used to read transaction dates. |
| p6.service.views.default.date.displayFormat.default | yyyy-MM-dd HHss z |
Set the display date format for transaction dates. |
p6.service.views.default.date.displayFormat.locale |
yyyy-MM-dd HHss z |
Optional - Set the display date format for transaction dates for a specific locale. |
| p6.service.workflowsteps.transaction.lock.acquire.timeout | 5000 | Set the period to wait for the acquisition of a transaction lock |
| p6.service.workflowsteps.runner.pool.size | 16 | Essential to extend the default(2) size of the cmb queue runner pool for this service |
| p6.service.workflowsteps.datamodel | TransactionInfo | Set the default transaction datamodel name if none defined on the workflowstep |
| p6.service.workflowsteps.expiry.status | EXPIRED | Set the status name when a workflowstep expires |
| p6.service.workflowsteps.notification.from | noreply@platform6.io | Set the default sender for workflow notification. This values will be overrided by the docModel if founded |
| p6.service.workflowsteps.notification.cc | Set the default cc for workflow notification. This values will be overrided by the docModel if founded | |
| p6.service.workflowsteps.user.api.limit | 500 | Maximum number of users to be retrieved on p6auth |
| p6.service.workflowsteps.xsd.url | https://doc.p6.sidetrade.io/latest/reference/built-in-services/workflow/resources/WorkflowStep.xsd | Set the XSD validation URL for workflowsteps |
| p6.service.workflowsteps.assignee.cache.ttl.secs | 180 | The number of minutes before cached assignees are refreshed |
| p6.tmp.folder | /tmp | Set the path where temporary files are stored. |
| p6.public.config | [“p6auth.org.children.limit”] | Set the configuration entries to be publicly exposed. |
Note
All the entries under p6.service.default.<key> can be overridden using: p6.service.<name>.<key>
Docker¶
In your docker-compose.yml file you can use environment variables to define some configuration entries
| Environment variable | Configuration entry |
|---|---|
| p6auth_client_id | p6auth.client.id |
| p6auth_client_secret | p6auth.client.secret |
| p6core_instance_id | instance.id |
| p6core_tmp_folder | p6.tmp.folder |
| p6core_database_host | database.host |
| p6core_database_port | database.port |
| p6core_database_name | database.name |
| p6core_database_schema | database.schema |
| p6core_database_username | database.username |
| p6core_database_password | database.password |
| p6core_antivirus_engine | antivirus.engine |
| p6core_antivirus_action | antivirus.action |
| p6core_antivirus_clamav_hostname | antivirus.clamav.hostname |
| p6core_antivirus_clamav_port | antivirus.clamav.port |
| p6core_antivirus_clamav_timeout | antivirus.clamav.timeout |